nodo-domotica.nl
http://www.nodo-domotica.nl/forum/

Wiznet W5500 Ondersteuning ?
http://www.nodo-domotica.nl/forum/viewtopic.php?f=4&t=2547
Pagina 1 van 1
Auteur:  bunny007 [ 30 jan 2016, 12:01 ]
Titel:  Wiznet W5500 Ondersteuning ?

Iemand ervaring met de "nieuwe" Wiznet W5500 ethernet shields ?
lijkt me wel een upgrade voor de nodo;

• Supports following Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
• Supports 8 independent sockets simultaneously
• Supports Power down mode
• Supports Wake on LAN over UDP
• Supports High Speed Serial Peripheral Interface (SPI MODE 0, 3)
• Internal 32Kbytes Memory for Tx/Rx Buffers
• 10BaseT/100BaseTX Ethernet PHY embedded
• Support Auto Negotiation (Full and half duplex, 10 and 100-based)
• Not support IP Fragmentation
• 3.3V operation with 5V I/O signal tolerance
• LED outputs (Full/Half duplex, Link, Speed, Active)
• 48 Pin LQFP Lead-Free Package (7x7mm, 0.5mm pitch)

Afbeelding

Ref : http://www.ebay.com/itm/W5500-Network-Expansion-Board-SPI-to-Ethernet-Shield-Replace-W5100-For-Arduino-/181924162842?hash=item2a5b866d1a:g:H7MAAOSwwbdWQGSQ

Ref : http://www.shopwiznet.com/w5500
Pagina 1 van 1 Alle tijden zijn GMT + 1 uur